Home › Scrapping Tips › Scrap Metal Safety: Gear and Cutting Basics

Scrap Metal Safety: Gear and Cutting Basics

Scrap work is cuts, sparks and heavy metal. Most injuries come from three things: sharp edges, cutting tools, and sealed containers that should never have been cut. The habits below cover all three.

Wear the basic gear

Leather gloves. Torn sheet metal and cut pipe edges are razor sharp. Gloves are the single most important piece of gear in this trade.

Safety glasses. Cutting, grinding and snapping rusty bolts all throw fragments. Wear glasses whenever a tool is running or you are prying something apart.

Boots, long pants, long sleeves. Steel-toe boots if you have them. Dropped cast iron breaks toes, and sharp scrap finds bare skin fast.

Hearing protection and a dust mask. For grinding sessions and dusty tear-outs. Cheap foam plugs and a disposable mask are enough for occasional work.

Cutting with a reciprocating saw

Clamp the piece, brace it, or stand on it so it cannot jump when the blade grabs. Let the blade do the work instead of forcing it, use a blade meant for metal, and keep cords and battery packs clear of the cut line. A saw that is bucking is a saw about to bite.

Cutting with an angle grinder

Keep the guard on and use a disc rated for your grinder and for the material. Point the spark stream away from yourself, other people, fuel and dry grass. Let the disc come to a full stop before setting the grinder down, and unplug it or pull the battery before changing discs. If a disc is cracked or chipped, throw it away; discs that come apart do it at full speed.

Never cut these

Sealed and pressurized items. Propane bottles, fuel tanks, air compressor tanks, refrigerant lines and airbags can explode, spray chemicals or deploy. Do not cut, crush or torch them, ever. Yards will not accept them sealed either; ask the yard how they want them prepared, and let them handle the dangerous ones.

Anything that held fuel. Even an empty fuel tank holds vapor. Leave tanks whole and ask the yard about their policy.

Fluids, lead and cuts

Drain fuel, oil and coolant into a bucket before tearing down, and keep rags handy. Wash your hands after handling lead, batteries and oily parts, and before eating. Scrap cuts get dirty fast, so clean any cut right away and keep your tetanus vaccination current.

At the yard

Watch for forklifts, loaders and crane magnets, and stay where the scale operator can see you. Unload only where you are pointed to. Kids and dogs stay in the truck; a scrap yard is a working industrial site, not a playground.

More scrapping guides

All scrapping tips →
Find a scrap metal yard near you →